Ebyte E78-868LN22S User Manual page 25

E78-868LN22S
Command
character
CSAVE
(Save MAC
parameter
settings)
Command
character
CRESTOREMAC
(Restore MAC
default
parameters)
Command
character
IREBOOT
(Restart module)
OK
Set how long the rx1 window will open after sending, and set before
Precautions
sending data. It is the protocol default value when not set.
Command
Command Format
Type
Test
AT+CSAVE=?
command
Setting AT+CSAVE
command
Parameter
Description
<MType>: 0: unconfirm package, 1: confirm package.
<value>: is the maximum number of transmissions, ranging from 1 to 15;
Return value
description
This command saves the configuration parameters to EERPOM/FLASH
Example After executing the AT+RESET command, the module will use the new
MAC configuration parameters for network initialization and operation.
Precautions Need to save before sending data
Command
Command Format
Type
Test AT+CRESTOREMAC=?
command
Setting
AT+CRESTOREMAC
command
Parameter
Description
This command restores the MAC default configuration parameters to
Return value EERPOM/FLASH.
description
AT+CRESTOREMAC
Example OK
Precautions
Command
Command Format
Type
Test AT+IREBOOT=?
command
Setting AT+IREBOOT=<mode>
command
Parameter <mode>: restart mode;
Description
0: Restart the communication module immediately.
1: Wait for the radio frame currently being sent in the communication
Return value
module to complete and then restart.
description
AT+IREBOOT=1
Example
OK
response
+CSAVE
OK
OK
response
+CRESTOREMAC
OK
OK
response
+IREBOOT:"Mode"
OK
OK
25