Biostar TA970 Setup Manual page 23

TA970
6. Select the proper BIOS file,
and a message asking if you
are sure to flash the BIOS file.
Click Yes to start updating
BIOS.
7. A dialog pops out after BIOS
flash is completed, asking you
to restart the system. Press the
[Y] key to restart system.
8. While the system boots up and the full screen logo shows up, press
<Delete> key to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.
21