Chapter 3: Headers & Jumpers Setup; How To Setup Jumpers; Detail Settings - Biostar TA970 Setup Manual

CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 How to Setup Jumpers

The illustration shows how to set up jumpers. When the jumper cap is placed on
pins, the jumper is "close", if not, that means the jumper is "open".
Pin opened

3.2 Detail Settings

PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case's front panel switch
functions.
Pin Assignment
1 +5V
2 N/A
3 N/A
4 Speaker
5 HDD LED (+)
6 HDD LED (-)
7 Ground
8 Reset control
Pin closed
Function Pin Assignment
9 N/A
Speaker 10 N/A
Connector
11 N/A
12 Power LED (+)
13 Power LED (+)
Hard drive
LED
14 Power LED (-)
15 Power button
Reset button
16 Ground
TA970
Pin1-2 closed
Function
N/A
N/A
Power LED
Power-on button
13