LOBSTER SPORTS Elite Freedom Troubleshooting Manual

Objective: To troubleshoot elevation issues for Elite Freedom, Liberty, EL01, EL02, EL03
Action
1 To troubleshoot elevation issues for the Elite Freedom,
Liberty, EL01, EL02, and EL03 follow steps below.
For troubleshooting elevation issues with a Grand Series
machine (EL04, EL05, EL05 LE) see Troubleshooting
Grand Error Messages
2 Elite Model 1-3
*(Make sure the machine is turned off).
1. Touch the elevation indicator at the front of the
machine if through light pressure the yoke swings
freely the yoke has come unattached from the
elevation assembly.
a. remove the case by unscrewing the (6)
screws along the bottom of the red case.
Be careful not to disconnect any additional
wires.
b. The elevation motor sits under the yoke In
model EL01 two metal links form an arm
that connects the elevation motor to the
yoke, the screw to the yoke may have
come loose (tighten) or the spring pin that
connects to the motor may have broken.
A Return Authorization is needed.
3 If the elevation is solid and not moving at all
I.
II.
Author: CT Contributors: JR,RR
Elite Model, 1, 2, 3, Freedom, and Liberty ONLY
TS – My Elevation Is Not Working
if serial number is before EL01-
003132, EL02-10961, EL03-11331, an
RA is needed. (Call 1-800-526-4041
ext.14 to obtain an Return
Authorization number).
If After follow instructions below.
Pictures
Elevation Indicator
Case Screws (Front & Rear)
Case Screws (Side)
Orig. date: 9/20/10 Revised:11/19/13