Hydrofarm Active Eye LGBQM Quantum PAR Meter Instruction Manual

Measures photosynthetically active radiation par from 400 to 700 nm

Download this manual

INSTRUCTION MANUAL

quantum PAR meter

Measures photosynthetically active radiation (PAR) from

400 to 700 nm

The Quantum Par Meter is designed to measure PAR (Photosynthetically

Active Radiation) flux in wavelengths ranging from 400 to 700 nm. There

is a proportional relationship between the number of photons absorbed

in 400 to 700 nm band and the rate of photosynthesis in plants, which is

important for horticultural studies and monitoring plant physiology. This

compact, fully portable handheld light meter measures up to 10,000 in

units of micro-mol per meter squared per second (umol/m2/s) which is

also called Photosynthetic Photon Flux Density (PPFD).

Need help?

Do you have a question about the Active Eye LGBQM Quantum PAR Meter and is the answer not in the manual?

Page 1 INSTRUCTION MANUAL quantum PAR meter Measures photosynthetically active radiation (PAR) from 400 to 700 nm The Quantum Par Meter is designed to measure PAR (Photosynthetically Active Radiation) flux in wavelengths ranging from 400 to 700 nm. There is a proportional relationship between the number of photons absorbed in 400 to 700 nm band and the rate of photosynthesis in plants, which is important for horticultural studies and monitoring plant physiology.
Page 2 0. must install a driver. You can download the 4. To review readings, simply press the up QuantumParMeter at www.hydrofarm.com or down arrows. The measurements and uncompress the QuantumParMeter will be displayed along with the folder.
Page 3 INSTRUCTION MANUAL INTERFACE GUIDES If you have a desktop shortcut, click the shortcut Quantumlightmeter directly or click ‘Start’ ->All Programs-> Quantumlightmeter. 1. If the Quantum Par Meter was not connected to your computer, the following dialog should appear: The square button becomes RED and you will get the following message: “Meter not detected –...
Page 4 WARNING: During the Data transmission process, the Quantum PAR Meter must be powered on. When the device and your computer are connected, please do not unplug the device. Close the software first and then the device can be unplugged. www.hydrofarm.com...