BoomToneDJ Cirrus 1000 User Manual page 10

- Let the machine perform at full output for approximately 20 minutes, to make sure
any internal dirt is removed when possible.
- Turn off the machine and let it cool down. Remove the demineralized/distilled water
from the tank.
IMPORTANT: You can save the demineralized/distilled water that was not used, but
only use it again for fog machine cleaning purposes, as traces of fog liquid have mixed
with the water inside the tank.
NOTE: When the machine will not be used in the near future, you may leave the tank
empty. The demineralized/distilled water will stay inside the machine, which is
harmless. - Fill the machine with fog liquid and turn it back on. Let the heating process
take place. When the fog machine is ready, let it perform at 100% output. You will
notice that the machine produces steam, which will smoothly transform into fog as the
fog liquid is pumped through the system.
9