Fetch Mighty User Manual page 45

Set up for Universal Remote
You can use this remote control to operate your TV as well as your Fetch Mighty box.
Your Fetch Mighty will try to set up your remote for you when you first set up your box but if that didn't work
follow the steps below.
1
Press and hold for 3 seconds until remote LED flashes twice. Your TV will now show a table of brands.
2
Press and hold the matching number on the remote control for your brand of TV.
As soon as TV turns off, stop pressing the remote. LED will blink twice. Your TV is now set up!
3
Using a different Fetch remote?
If your Fetch remote control has different buttons to the one shown above or if your TV brand is not listed on
screen when you follow the steps above, you will need to refer to the Universal Remote Set Up Guide on
fetch.com.au or go to Menu > Manage > Settings > Remote Control.
45