Arm Assembly - Weider WESY59100 User Manual

12. Secure the Press Top Frame (9) to the Butterfly Top
Frame (33) with two 3/8" x 3 1/4" Bolts (62), two
3/8" Flat Washers (48), and two 3/8" Nylon
Locknuts (50). Do not tighten the Nylon Locknuts
yet.
13. Secure the Weight Guides (15) to the Press Top
Frame (9) with two 3/8" x 1 3/4" Bolts (57) and two
3/8" Nylon Locknuts (50).
Tighten the Nylon Locknuts used in steps 2–13.

ARM ASSEMBLY

14. Locate and open the parts bag labeled "ARM
ASSEMBLY."
Lubricate the axles on the Butterfly Top Frame (33).
Secure the Right Pivot Arm (85) to the right axle
with two Retainer Rings (31) and a 1" Round Outer
Cap (38). Do not confuse the Right Pivot Arm
with the Left Pivot Arm (not shown). The
Retainer Rings may break if disassembled.
Note: Be sure the Retainer Rings (31) and 1"
Round Outer Cap (38) are oriented as shown in
the inset drawing.
Repeat this step with the Left Pivot Arm (not shown)
and left axle.
12
9
13
9
14
Axle
31
38
9
50
62
48
48
57
50
50
15
33
Lubricate
85
31
38
33