HBM VK20A Mounting Instructions page 7

VK20A
It is strictly forbidden to carry out any repairs and solder­
ing work on the motherboards or to replace any compo­
nents. Repairs may only be carried out by persons autho­
rized by HBM.
S During installation and when connecting the cables,
take action to prevent electrostatic discharge as this
may damage the connected electronics.
S When connecting additional devices, comply with the
safety requirements for electrical measurement, con­
trol, regulatory and laboratory equipment (EN 61010).
S All the interconnecting cables must be shielded
cables. The shield must be connected extensively to
ground on both sides.
A2335-2.0 HBM: public
Safety instructions
5