Safety Instructions - HBM VK20A Mounting Instructions

1

Safety instructions

VK20A
Appropriate use
To ensure safe operation, the junction box may only be
used as described in the mounting instructions. It is also
essential to follow the respective legal and safety regula­
tions for the application concerned during use. The same
applies to the use of accessories.
The junction box is not a safety element in terms of
appropriate use. For correct and safe operation of this
junction box, it is essential to ensure appropriate trans­
portation, storage, installation, and fitting and to operate
and maintain all equipment with care.
General dangers of failing to follow the safety
instructions
The junction box corresponds to the state of the art and
is safe to operate. If the junction box is used and oper­
ated inappropriately by untrained personnel, residual
dangers may arise.
Everyone responsible for installing, starting up, maintain­
ing or repairing the junction box needs to have read and
understood the operating manual and in particular the
safety instructions.
Residual dangers
The scope of performance and supply of the junction box
covers only part of the connection technique. In addition,
equipment planners, installers and operators should plan,
implement and respond to the safety engineering consid­
erations of the connection technique in such a way as to
minimize residual dangers. Prevailing regulations must
be complied with at all times. Residual dangers con­
A2335-2.0 HBM: public
Safety instructions
3