(SYNC Button). In Basic Installations, the AUTO button on the RF Remote Control isn’t used (It has no function) See Advanced Installation Instructions for use of the Auto button Inst.388 Astral Pool SLX Light Connect Lite Instructions V01.18...
Page 4
NB If you wish to “unpair” an RF Remote control from a Connect Lite, then follow step 5 above, except press the On/Off button 3 times ( You need to wait 1 second between presses of the On/Off button.) Figure 1 Inst.388 Astral Pool SLX Light Connect Lite Instructions V01.18...
Page 5
Lite’s are connected together via RJ12 cables, to ensure smooth communication between each Connect LITE it is essential that only one of the Connect Lite’s has Dipswitch 2 (See Figure 1) in the Off position. i.e Turn Dipswitch 2 ON on all but one of the connected units. Inst.388 Astral Pool SLX Light Connect Lite Instructions V01.18...
Page 6
2. Within 5 seconds of pressing (and holding) the Set Up Switch, press the Colour button on the RF Remote Control 1 times. 3. Release the Set Up Switch and the colour sequence will now be "AstralPool SLX" pattern Inst.388 Astral Pool SLX Light Connect Lite Instructions V01.18...
Page 7
Important note: Regular maintenance is important to ensure long life and trouble free performance of your pool equipment. If unable to perform the maintenance yourself, contact your local AstralPool office who will arrange a trained service technician to perform the maintenance for you. Notes Inst.388 Astral Pool SLX Light Connect Lite Instructions V01.18...
Page 8
Inst.388 Astral Pool SLX Light Connect Lite Instructions V01.18...