Table of Contents
Advertisement
ATTACHING AND REMOVING THE SEAT
Set the Seat Frame (36) onto the indicated pin on the
36
Front Upright (42). Attach the Seat Frame to the Front
40
Upright with a 5/16" x 2 3/4" Carriage Bolt (14) and
14
42
13
the Seat Knob (40).
For some exercises, the Seat (13) must be removed.
First, make sure that the Chain (not shown) is not
Pin
attached to the Leg Lever (29). Next, remove the
Seat Knob (40) and the 5/16" x 2 3/4" Carriage Bolt
29
(14) from the Seat Frame (36). Lift the Seat Frame off
the Front Upright (42).
ATTACHING THE LEG LEVER TO THE LOW
PULLEY STATION
To use the Leg Lever (29), the seat must be attached
to the front upright (see ATTACHING AND REMOV-
29
ING THE SEAT, above).
35
53
Attach the Short Cable (58) to the 3/8" x 2" Eyebolt
(35) with a Cable Clip (53).
58
14
Hide quick links:
Advertisement
Table of Contents
