Toro Groundsmaster 1200 Series Installation Instructions page 2

1
Preparing the Machine
No Parts Required
Procedure
1. Connect the machine to the tow vehicle; refer to
the Operator's Manual for the machine.
2. Lower the mower decks; refer to the Operator's
Manual for your machine.
3. Engage the parking brake for the tow vehicle,
shutoff the engine, remove the key, and wait
for all moving parts to stop before leaving the
operator's seat.
2
Installing the Slow-Moving
Vehicle Sign
Parts needed for this procedure:
1 Slow-moving vehicle sign
2 Capscrew
2 Washer
Procedure
1. At the right deck gearbox, align the slow-moving
vehicle sign so that the reflective side is rearward
(Figure 1).
1. Capscrew
2. Washer
2. Align the holes in the slow-moving vehicle sign
with the threaded holes in the gearbox as shown
in Figure 1.
3. Assemble the slow-moving vehicle sign to the
gearbox with 2 capscrews and 2 washers.
4. Torque the capscrews to 59 to 73 N∙m (80 to
100 ft-lb).
2
Figure 1
3. Threaded hole (right deck
gearbox)
4. Slow moving vehicle sign
g280579
g280577