Vax 6131 multivax User Manual page 5

6131 Series User Guide v1.1_User guide 26/10/2011 14:08 Page 5
Operation
Carpet washing
IMPORTANT: Do not use the cleaner as a dry vacuum when set up in carpet washing mode.
Before you begin cleaning:
1. Vacuum thoroughly – use your machine in dry mode and vacuum your upholstery with appropriate tool.
2. For upholstery, always check manufacturers guidelines before washing.
Test for colourfastness – wet a white absorbent cloth with the solution. In a small, hidden area gently rub the
surface with the dampened cloth. Wait ten minutes and check for colour removal or bleed with white paper towel
or cloth. If surface has more than one colour, check all colours.
When cleaning an entire floor, move furniture out of area to be cleaned. For furniture too heavy to move, place
aluminium foil or wax paper under legs. This will prevent wood finishes from staining carpet. Pin up furniture
skirts or curtains.
Helpful hints for cleaning carpet:
1. Only use Vax recommended carpet cleaning solution with this machine.
2. Do not saturate carpet with cleaning solution while using the machine.
3. For heavy soiled areas, additional applications may be necessary.
4. Allow plenty of time to dry carpet thoroughly.
5. Try not to walk on carpet until it is completely dry.
6. After carpet is thoroughly dry, vacuum the carpet using your multifunction cleaner in dry mode.
7. Before cleaning, determine where to start and end, making sure not to walk over previously cleaned areas.
8. Thoroughly clean the dirty water tank and clean water tank after use with warm water (max 40°C).
.
5
vax.co.uk