The EASTWOOD 40 GALLON PARTS WASHER is specifically designed with heavy-duty, all steel components and a quality powdercoated finish to provide years of trouble-free service. It features a re-useable filter and an oversize Tub accepts larger parts and allows longer fluid life.
• DO NOT use paint or powder dissolving solutions that would remove the powdercoated finish of the Tub and components. • Used degreasing fluids are hazardous materials and should be disposed of in compliance with local regulations. To order parts and supplies: 800.343.9353 >> eastwood.com...
Page 4
Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com...
Page 5
• Grasp Pump Box Assembly [D] with the Switch Box upward and facing outward then pass the Power Cord and Switch Box through the rectangular cutout at the upper right rear wall of the Tub (FIG 3). FIG. 2 FIG. 3 To order parts and supplies: 800.343.9353 >> eastwood.com...
Page 6
• Thread the fitting of the Flexible Metal “Gooseneck” Fluid Outlet Tube [E] onto the Pump outlet (FIG 6). • Set the Parts Tray [F] on the rails welded to the inside wall of the Tub. FIG. 5 FIG. 6 Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com...
(not included) to remove stubborn deposits. • Allow excess solution to drain from parts then remove from washer and rinse in warm water. • When done, turn pump to the off position, close lid and unplug unit. To order parts and supplies: 800.343.9353 >> eastwood.com...