Advertisement
English
The enabled line is the one indicated by the flashing
arrow. Press key
Press
to switch from one value to the next. Press
EXIT
the
key to quit the programming phase.
3.2.c - Night time programming
To enter the time the "night time" function begins and
ends, press the "PROG
message will appear on the display:
Night time
Start
End
The enabled line is the one indicated by the flashing
arrow. Press
to switch from one value to the next. Press the
EXIT
key to quit the programming phase.
3.3 - DATA INFO AND RESET
Place the key (1) on the sensor (2). The buzzer will ope-
rate indicating recognition. Meanwhile the name of the
utilized key (ACCOUNT) will appear on the display,
enabling the keyboard for the data info and reset phases.
2
to enter the time settings.
PROG
" key until the following
...............
...............
to enter the time settings. Press
1
ESPRESSOTIME
Friday 15:36
Account
3.3.a - Reading and reset of grand total and No. of
selections
To access the info phase, press the
following message will appear on the display:
Grand total
Reset NO
Where the value under the Grand Total message
(478250) indicates the total takings since the last reset.
To reset the value, press RESET
depressed until the following message appears:
Grand total
Reset NO
ATTENTION:
The reset operation resets the grand total and
automatically resets the number of selections and
user totals.
To read how many times the key has been pressed since
the last reset for each selection, press the
the following message will appear on the display:
No. Of selections
Choose a selection
English
n°
key and the
478250
and keep it
RESET
0
n°
key and
Advertisement
