Advertisement
English
IMPORTANT
if the data are not entered within 2 min. from access
to the relative mask in the programming phase, the
machine will automatically return to the initial mask
(above), maintaining the previously set data in the
memory.
3.2.a - Price programming
After having placed the key as indicated in the previous
section, press the "PROG
and the following display message will appear:
Select. Setting
Choose a selection
Now begin entering the prices of all the selections
programmed on the machine. To do this, press a selection
key on the keyboard. For example, press the
and the following message will appear on the display:
Selection 00
Coffee 1 M M 1
Price
.........
Night
.........
The flashing arrow will indicate the selection that can be
varied, in this case the price. To vary the price, use the
keys to either increase or decrease the value.
For example, if value 1.50 is required, press on the +
key until this value has been reached.
Selection 00
1 Coffee M M 1
Price
1.50
Night
.........
To switch from the day price to the night price, press key
and watch to see that the flashing arrow moves.
Now enter the night price by means of the "+" and "-"
keys.
PROG
" key on the keyboard
The machine will automatically memorize the cost of the
"Selection 00" coffee for waiter keys 1 to 13. To memorize
the price for the additional keys from 20 to 27 also, press
the
key and the display will visualize:
Night
Keys 20 - 27
press
it is not possible to choose between the day price and
night price.
To switch to another selection and enter the prices, press
the desired selection key on the keyboard. For example,
press
and the following message will appear on
the display:
key
Coffee 2
Price
Night
then repeat the previously indicated operations for all
the selections, including water.
It is important to enter the prices in all selections. Enter
value "0" for those selections with "0" price.
3.2.b - Programming the on and off times of the
machine
The machine can automatically turn itself on and off when
the time settings are programmed. It is also possible to
program the weekly closing day when the machine
remains off.
Press the "PROG
message will appear on the display:
Time ON
Time OFF ............
Selection 00
.........
to enter the desired price. In this case,
Selection 01
M M 1
.........
.........
PROG
" key until the following
............
Closing day
................
English
Advertisement
