Connection Description - Hisense LHD32K3500HK User Manual

6

Connection Description

・Selecting signal input
To enjoy the show from a cable set-top boxes and other external devices, select mode
with this device is connected, press the
local port corresponding to the signal source in the
・Connecting an Antenna or Cable
Wired / Antenna input: It can be connected to cable networks or antenna.
• Need to switch Analog TV, Digital TV-DTMB signal, please press the
enter the setup menu, select
・Connecting a USB Device
USB: This machine has the USB standard interface, which can be connected to
standard equipment with USB1.1, USB2.0 , including hard disk, U-disk and so on.
When multifunction USB external device is a combination device, it is recommended
that you use USB 1 jack. When using the USB2 interface, it is recommended that you
use the USB extension cable.
The total current should be no more than 1400 mA when all the USB jacks are
connected with external devices. Hisense warranty does not cover the TV damages
and issues caused by the current overload.(Only USB 1 jack supports USB 3.0 devices)
・Connecting an Ex-Speaker
COAXIAL: Use a coaxial cable to connect the TV's COAXIAL jack to the Audio
Amplifier, then connect the Audio Amplifier to the external speaker.
COAXIAL
button to enter the
Tuner to switch.
or
6
Source
Source menu.
Audio amplifier
COAXIAL
Speaker audio amplifier to be connected.
menu, select the
to
button
Speaker