Safety Guidelines - Definitions; Important Safety Instructions; General Safety Warnings And Instructions - Stanley SB01AL Instruction Manual

FEATURES
CARACTERÍSTICAS
1
2
3
1. Light mode pushbutton (high/medium/off/flash)
2. 20 ultra bright LEDs
3. Flexible rubber groove stand
4. Back cover
5. Back cover screw
6. Magnetic discs (exposed to show details)
7. Battery compartment containing three (3) "AA" alkaline
dry cell batteries (may be sold separately)
8. Back cover screw hole
9. Battery strap
10. Light holder (locks light on stand)
11. Magnetic base
12. Attachment bar (for securing the light to the light holder)
13. Optional camera attachment bar
SB01AL_SBALCSB_SBALCSR_SBALCSY_Manual_ENSP_051614.indd 2-3
4
5 7
6
10
11
13
1. Botón del modo ligero (alto/medio/apagado/destella)
2. 20 ultra brillantes LEDs
3. Soporte de goma flexible
4. Contraportada
5. Tornillo de la contraportada
6. Discos magnéticos (expuesto para demostrar los detalles)
7. Compartimiento de batería que contiene tres (3) "AA"
baterías secas alcalinas (puede ser vendido por separado)
8. Agujero del tornillo de la contraportada
9. Correa de la batería
10. Sostenedor ligero (luz de las cerraduras en soporte)
11. Base magnética
12. Barra del accesorio (para asegurar la luz al sostenedor
ligero)
13. Barra opcional para atar la cámara
2
SAFETY GUIDELINES / DEFINITIONS
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death
or serious injury.
8
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
9
moderate injury.
CAUTION: Used without the safety alert symbol indicates potentially hazardous situation which, if
not avoided, may result in property damage.
RISK OF UNSAFE OPERATION. When using tools or equipment, basic safety precautions should
always be followed to reduce the risk of personal injury. Improper operation, maintenance or
modification of tools or equipment could result in serious injury and property damage. There
12
are certain applications for which tools and equipment are designed. Manufacturer strongly
recommends that this product NOT be modified and/or used for any application other than for
which it was designed. Read and understand all warnings and operating instructions before using
any tool or equipment.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS
WARNING: Read all instructions before operating the work light. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious injury.

GENERAL SAFETY WARNINGS AND INSTRUCTIONS

WARNING: This product or its power cord contains lead, a chemical known to the State of
California to cause cancer and birth defect or other reproductive harm. Wash hands after handling.
WARNING: RISK OF FIRE, ELECTRIC SHOCK, BURST HAZARD, OR INJURY TO PERSONS – WHEN
USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING
THE FOLLOWING:
• Do not put light in water or other liquid. Do not place or store this light where it can fall or be
pulled into water or become wet.
• Keep light lamp away from materials that may burn.
• Do not clean this appliance with a water spray or the like.
CAUTION: TO REDUCE THE RISK OF INJURY OR PROPERTY DAMAGE:
• Avoid dangerous environments:
– Don't use the light in damp or wet locations. This unit is NOT waterproof. Do not immerse light
in water or other liquids.
3
5/16/2014 11:18:15 AM