General Safety Warnings And Instructions; Safety Guidelines - Definitions - Stanley SQUIDBRITE HEAVY DUTY Instruction Manual

FEATURES
CARACTERÍSTICAS
BACK OF LIGHT
3
4
BOTTOM OF LIGHT
5
6
FEATURES
1. Light mode pushbutton (high/low/off/flash)
2. Flexible rubber groove stand
3. Magnetic discs (exposed to show detail)
4. Charging status indicator LED
5. 6 volt DC charging port
(for use with 120 volt AC charger )
6. Attachment bar (for securing the light to the light holder)
7. Light holder (locks light on stand)
8. 120 volt AC charger
1
2
7
CARACTERÍSTICAS
1. Botón del modo ligero ( alto/bajo/apagado/destella)
2. Soporte de goma flexible
3. Discos magnéticos (expuesto al detalle de la demostración)
4. Indicador de estado de carga LED
5. Puerto de recarga de CC de 6 voltios
(para usar con cargador de la CA de 120 voltios)
6. Barra del accesorio (para asegurar la luz al sostenedor ligero)
7. Sostenedor ligero (luz de las cerraduras en soporte)
8. Cargador de la CA de 120 voltios
2
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

GENERAL SAFETY WARNINGS AND INSTRUCTIONS

READ ALL INSTRUCTIONS
WARNING: Read all instructions before operating light. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
8
SAFETY GUIDELINES / DEFINITIONS
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided,
may result in property damage.
RISK OF UNSAFE OPERATION. When using tools or equipment, basic safety precautions should always be
followed to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or
equipment could result in serious injury and property damage. There are certain applications for which tools and
equipment are designed. Manufacturer strongly recommends that this product NOT be modified and/or used for
any application other than for which it was designed. Read and understand all warnings and operating
instructions before using any tool or equipment.
3