First Time Use Procedure - Westfalia Auto Code Getting Started Manual

First Time Use Procedure

Your Auto Code arrives to you in a locked state. This is for security and registration purposes.
To use your new Auto Code first you are required to unlock your unit. Please follow the
instructions below to obtain your "Registration Code":
Plug the Auto Code in to the diagnostic socket on any available
car with a 16Pin socket, or if you have purchased a mains
power supply you can use this. The handset will now boot up
and you will be presented with the main menu.
Using the arrow keys, navigate to the "System Setup Icon" and
press OK to enter the "Setup" menu.
Using the arrow keys again, navigate to the "Application
Unlock" icon and press OK to enter the unlock screen.
Record the Serial Number and the Registration Code on the
screen and then call Technical Support on 0844 561 7861.
You will be asked to provide your customer details including
an up to date email address. This is important so we can keep
you informed of any software updates.
Technical Support will now use this information to generate an
"Unlock Code" and when asked please press the OK button to
proceed to the next step.
8