Assembly; Operation; Switching On/Off; Nozzle Usage - CARAMBA CP-WDE 1511 P Translation Of The Original Instructions For Use

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 16
GB
• Only have repairs carried out
at our authorised customer
service points.
• Observe the instructions for
cleaning and maintenance of
the machine.
• Store the appliance in a dry
place and out of reach of chil-
dren.

Assembly

Pull out the mains plug.
This will prevent danger of injury
from electric shock.
The appliance is supplied with the
textile fi lter bag (
1. Attach the carrying handle (2)
fi rmly using the cross-head
screws (2a) supplied.
2. Insert the fi lter:
- Foam fi lter for wet vacuum-
ing (
- Material fi lter (
vacuuming,
- Paper fi lter bag (
Never vacuum without a fi lter!
3. Place the motor housing (1) on
top of the dirt collector (8) and
top of the dirt collector (8) and
close it
4. Connect the vacuum hose (13)
(bayonet fi xing) and the acces-
sories.

Operation

Fully unwind the suction hose
(
13) before commencing work.
20
16) fi tted.
15),
16) for dry
17).
with the clips (6).

Switching on/off

Connect the mains plug.
Switching on the vacuum:
On/off switch (
Switching off the vacuum:
On/off switch (

Nozzle usage

Floor nozzle (
ment (
19):
for wet and dry vacuuming of smooth sur-
faces and fi tted carpets.
Floor nozzle (
tachment (
19):
for wet and dry vacuuming of fi tted car-
pets and for removing persistent dirt.
Press the clips on the right and left
side of the fl oor nozzle (
remove the insert attachment (
Mind that sensitive surfaces might
get scratched if the insert attach-
ment is not used.
Crevice nozzle (
for vacuuming gaps, corners and radiators.

Wet vacuuming

1. For wet vacuuming or to vacuum wa-
ter, fi t the foam fi lter (15) to the fi lter
basket (21).
To avoid tearing the foam fi lter (15):
- Use only a dry fi lter;
- Before inserting, twist the edge of
the fi lter slightly and then roll it back.
2. Suctioning up (draining) water: place
the suction hose (
3) in position "I".
3) in position "O".
18) with insert attach-
18) without insert at-
18) and
20):
13) on the han-
19).

Advertisement

Table of Contents
loading

Table of Contents