Advertisement
OPERATION
SHREDDING
1) Plug the shredder into the electrical outlet.
2) Slide the power switch into the auto position (to the right).
3) To shred paper or credit card: insert straight into the intake throat.
4) Empty the paper bin frequently to avoid jams.
For all safety purposes, always turn of the shredder when not in use.
EMPTYING PAPER BIN
The shred level in the bin should be checked frequently to avoid jams and damaging to the cutter
mechanism.
1) Slide the power switch into the off position and unplug the cord from the electrical outlet.
2) Lift the shredder head by the handles to remove from paper bin. Empty contents into the trash
or recycle bin.
3) Securely place the shredder head back on the paper bin.
4) Plug the power cord back into the electrical outlet and slide the power switch into the auto po -
sition to resume normal operation.
OVERHEATING
The overheat indicator will turn red and the machine will shut off if the motor becomes too hot
after shredding for more than 2 minutes.
Let the shredder cool until the overheat indicator turns off (about 30 minutes).
Turn the shredder OFF and ON again and continue shredding as normal.
CLEARING A JAM
The shredder will automatically stop when a jam occurs.
To clear jam:
◦ Move the power switch to the reverse position (to the left).
◦ Grasp the excess paper.
◦ Pull paper out.
Clearing a jam while in reverse
◦ Move the power switch to the auto position.
◦ Let shredder run for about 5 seconds.
If jam does not clear, move the power switch to the reverse position and run for five
▪
seconds. Repeat this procedure until the jam is cleared.
If the jam still does not clear, unplug the machine and remove paper manually.
▪
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Seite 5
Advertisement
