Page 2
The Absolute Phono’s standby power consumption follows the latest EU directive and is below 0.5 Watts. For ease of use the Absolute Phono is equipped with a bright blue single multi-function switch for ‘On’, ‘Off’, ‘Mute’ and ‘Standby’ modes. The Absolute Phono is suitable for all Clearaudio tonearms and will be installed by Clearaudio in our factory in Erlangen, Germany.
Important: Please note that you may only use power supplies with a voltage of 6V DC! Pic.2: Absolute phonostage (front view) 4. Lightly press the push button on the front of the Absolute Phono. The blue LED ring will flash approximately seven times and then glow steadily.
Page 4
To return to normal operation, lightly press the button again. The LED ring will glow steadily. To put the Absolute Phono into standby mode (power consumption 0.5 Watt), press and hold the multi-function button until the LED ring first flashes slowly and then extinguishes.
Page 5
Stummschaltung / Mute aktivieren. Die „Absolute Phono" kann in alle gängigen clearaudio-Tonarme werksseitig eingebaut werden. Die Schaltung von „Absolute Phono“ ist so ausgelegt, dass sie in Verbindung mit einem MC– Tonabnehmer eines beliebigen Herstellers optimal funktioniert. Dies wird durch die gewählte „Stromverstärkung – Schaltung“ gewährleistet. Dadurch entfällt die Notwendigkeit einen optimalen Abschlusswiderstand bzw.
Page 6
Rückansicht: Bitte gehen Sie nun wie folgt beschrieben vor: 1. Verbinden Sie den speziellen clearaudio 9 – Pol Stecker vom Tonarm an die Buchse mit der Beschriftung „input amplifier“ und schrauben Sie diesen mit beiden Befestigungsschreiben fest. Bitte achten Sie darauf, dass die Schrauben korrekt festgezogen sind und der Stecker somit fest angeschlossen ist.
Um wieder in den Spielbetrieb zurück zu gelangen, betätigen Sie den Taster mit einem leichten, kurzen Druck noch einmal. Der LED – Ring blinkt wieder dauerhaft. Um die „Absolute Phono“ abzuschalten (Stand - by mit 0,5 Watt), halten Sie den Taster etwas länger gedrückt, bis der LED-Ring langsam blinkt und das blaue Licht erlischt.
5 years* Garantie 5 Jahre * *Only if the Clearaudio guarantee card is filled out correctly and returned to Clearaudio within 2 weeks of purchase. *bitte Garantiekarte ausfüllen und innerhalb von 14 Tagen an clearaudio zurück senden. Page / Seite 8...
Page 9
To benefit from the full Clearaudio warranty, you must fill out the relevant part of the warranty registration certificate /card and send it back to Clearaudio within two weeks of purchase. A warranty of five years will only be provided if the product is returned to us in its original packaging.