Advertisement
To insure your safety while assembling your Voyager product:
Fully read and understand the assembly instructions
Do not assemble this product if items are missing or damaged
Wear protective gloves, clothing and eye wear when assembling this product
Check tightness of all hardware each year to avoid injury
The following tools will be needed: (2) 9/16" wrenches, (2) ½" wrenches, Phillips screw
driver or screw gun.
1. Insert head of 4 carriage bolts into raceway on the underside of the rail and slide to
desired location on dock. Per diagram A.
2. Install 1 ¼" caps into the top of bench leg frames. Per diagram B.
3. If using on dock with Titan X-series decking skip to line 6. If used on dock with Titan
Classic deck , or similar height deck, a shim will need to be attached to bottom of the
bench legs.
4. Set bench leg upside down and attach shim with self drilling screws to leg. Per diagram
F.
5. Repeat step 4 for second bench leg.
6. Hook first bench leg into side of dock rail at desired location and slide carriage bolts into
brackets. Finger tighten nuts at this time. Per diagram C
7. Repeat step 3 for second bracket.
8. Attach Titan tread assemblies to bench leg frames (for bench seat and backrest) using 8
self drilling screws. Per diagram D.
9. Once bench is in desired location, put carriage bolt into raceway on the side of dock,
slide into bench bracket and install flange nut. Per diagram E.
10. Repeat step 6 for remaining 3 carriage bolts.
11. Use 9/16" wrench to tighten all 8 mounting bolts (carriage bolts).
Installation procedure
PAGE 3
Advertisement
