Download Print this page

Voyager Dock VM-052 Instructions Manual

Standing dock leg

Download this manual

Standing Dock Leg

PAGE 1

Page 1 Standing Dock Leg PAGE 1...
Page 2 3/8 X 1 S.S. CARRIDGE BOLT (4 REQ'D) 3/8 FLANGE NUT (4 REQ'D) 1/2 X 1 1/4 SQ. HEAD BOLT ( 8 REQ'D) 1/2 SQ. NUT BRASS (10 REQ'D) LEG CAPS (2 REQ'D) 5 PRONG KNOB (2 REQ'D) PAGE 2...
Page 3 To insure your safety while assembling your Voyager product:  Fully read and understand the assembly instructions  Do not assemble this product if items are missing or damaged  Wear protective gloves, clothing and eye wear when assembling this product Note: You may need assistancewhen turning dock over and also when installing dock in to the water.
Page 4 13) Put bracket on dock frame in desired location and tighten set bolt with ½” wrench and leave 5 prong knob as is until next dock is put in place per dock instruction manual. Per diagram F. 14) Dock can now be tipped over to upright position. 15) Install dock frame into water, check dock height and level.
Page 5: Parts List
Diagram A Raceway PARTS LIST ITEM PART NUMBER DESCRIPTION VM-007 LEG SOCKET ASM, [NS] VOY001-FOOTPAD DETACHABLE FOOTPAD HD-00058 1/2 SQ_NUT BRASS HD-00056 3/8 FLANGE BRASS NUT HD-00060 1/2 X 1 1/4 SQ BOLT S/S HD-00059 3/8 X 1 CAR S/S HD-00159 5 PRONG KNOB VM-112...
Page 6 Diagram C Diagram E Diagram B Flat side to bolts PAGE 6...
Page 7 Diagram D Diagram F VM-112 DOCK BRACKET NOTE: ONLY USED IF HOOKING UP MULTPLE DOCKS. PAGE 7...