Sony MDR-IF420RK Operating Instructions Manual page 8

b To connect to LINE OUT or REC
OUT jacks
Set the INPUT SOURCE selector to
LINE.
Transmitter
LINE
PHONES
Connecting cord (supplied)
to LINE OUT or
REC OUT jacks
Transmitter
LINE
PHONES
Connecting cord (supplied)
to LINE OUT or
REC OUT jacks
LINE
PHONES
to AUDIO IN B jack
Left Right
channel channel
(white) (red)
Stereo system,
TV, VCR, etc.
LINE
PHONES
to AUDIO IN A jack
Left channel (white)
Right
channel
(red)
Discman, MD
2
If your AC power adaptor is
equipped with a voltage selector,
before connecting the AC power
adaptor to an AC outlet, set it to the
operating voltage in your area with
a screw driver.
AC power adaptor (supplied)
3
Connect the transmitter to a power
source.
Notes
•Do not connect to the AUDIO IN A jack and B
jacks at the same time. If you do so, the audio
signals may be mixed.
•Use only the supplied AC power adaptor. Do
not use any other AC power adaptor.
Polarity of the plug
•If the plug of the AC power adaptor does not fit
in the AC outlet, use the supplied AC plug
adaptor.
•When you connect the connecting cord directly
to an earphone jack, the audio signal will not be
output through the right channel. In such a
case, use the separately sold PC-236HG plug
adaptor.
* WALKMAN is a registered trademark of Sony
Corporation.
7