Optional Accessories - Sony DG110BM Instruction Manual

5. Optional Accessories

. Feeler set DZ-5100
DZ-126 : Plastic ball-pointed feeler
DZ-131 : Carbide tipped flat feeler
DZ-141 : Off-center feeler
DZ-151 : Needle feeler
Note
1) Take care not to drop the probe on or scrape it against measured objects of hard material
or with rough surface.
2) Since the feeler tip is located off the spindle's axis, a variation of up to a count of two
may result in the measurements. The feeler arm may be bent by measuring forces (see
the figure below). But the bend little affects the measuring accuracy owing to the
constant measuring force.
Measuring force
0.3 N
0.6 to 0.7 N
1 to 1.2 N
. Gauge stand : DZ-501
Ceramic surface plate (Size 110 x 110 mm/4.33" x 4.33")
Mass : 13 kg
. Gauge stand:DZ-531
Large stone surface plate (Size 350 x 350 mm/13.78" x 13.78")
Mass : 38 kg
. Measuring force balancer : DZ-581
DG110BM/DG110BE
1)
2)
Bend
2 to 3 um/0.00008" to 0.00012"
4 to 5 um/0.00016" to 0.00020"
6 to 7 um/0.00024" to 0.00028"
5
(E)