Advertisement
Quick Links
Proto Paintball
USA 10637 Scripps Summit Ct. San Diego, CA 92131
®
P 858-536-5183 F 858-536-5191
EUROPE Unit 1, ZK Park, 23 Commerce Way
Croydon, Surrey CRO 4ZS United Kingdom
P +44 (0) 20-8649-6330 F +44 (0) 20-8649-6339
™
ASIA No. 253, Guojhong Rd., Dali City
Taichung County 412, Taiwan (R.O.C.)
P +886 (0) 4-2407-9135 F +886 (0) 4-2407-2090
www.protopaintball.com
www.dyematrix.com
Copyright ©2008 DYE Precision, Inc. The stylized "proto" logo and the "P" logo are
either registered trademarks, trademarks, or design trademarks of DYE Precision, Inc.
DYE Precision, Inc. U.S. Patent # 5,613,483. OTHER U.S. AND INT'L PATENTS PENDING.
Covered by one or more of the following U.S. Patents, 5,613,483; 5,881,707; 5,967,133; 6,035,843 and 6,474,326.
®
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Proto SLG ULTRALITE
Summary of Contents for Proto SLG ULTRALITE
- Page 1 Copyright ©2008 DYE Precision, Inc. The stylized “proto” logo and the “P” logo are either registered trademarks, trademarks, or design trademarks of DYE Precision, Inc. DYE Precision, Inc. U.S. Patent # 5,613,483. OTHER U.S. AND INT’L PATENTS PENDING.
-
Page 2: Table Of Contents
- TRIGGER ADJUSTMENTS ..........PAGE 1 1 INCLUDED WITH YOUR PROTO SLG™ ULTRALITE - SLG™... -
Page 3: Important Safety Instructions And Guidelines
IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES • The SLG™ marker is not a toy. Misuse may cause serious injury or death. • Always chronograph the SLG™ marker before playing paintball. • Please read, understand and follow the directions in the SLG™ •... -
Page 4: Quick Start Up Guide
QUICK REFERENCE QUICK REFERENCE USING YOUR MARKER USING YOUR MARKER QUICK START UP GUIDE STEP 4. ATTACHING GAS SOURCE Be sure there are no paintballs loaded in the breech of the SLG™. Before playing with your new SLG™ paintball marker there If the bolt is in the forward position, a ball can be fired when gas are a few important steps to take. - Page 5 SLG™ BOARD SLG™ BOARD SETTINGS AND FUNCTIONS SETTINGS AND FUNCTIONS BUTTONS AND LED LIGHT INDICATOR DIP switch 1, is used for factory reset/tournament lock. When it's OFF the gun is always set back to stock settings (semiauto, 15 bps, trigger There are two buttons and an LED light indicator mounted inside sensitivity 5).
- Page 6 SLG™ BOARD SLG™ BOARD SETTINGS AND FUNCTIONS SETTINGS AND FUNCTIONS BLUE – RATE OF FIRE (VALUES 1-20) YELLOW – FIRE MODE (VALUES 1-4) The ROF setting is used to set the The fire mode setting is used to select the fire mode of the SLG™. Factory default is semi maximum rate of fire of the SLG™.
- Page 7 SLG™ BOARD TRIGGER SETTINGS AND FUNCTIONS ADJUSTMENT BATTERY ADJUSTING YOUR TRIGGER FIGURE 1 The 9V battery will last for about The trigger’s forward travel, over travel and spring tension 20,000 shots. Please be aware that are fully adjustable so that the user can fine-tune the there are substantial differences in trigger to his or her exact liking.
- Page 8 SLG™ BOLT SLG™ BOLT ASSEMBLY OPERATION SOFT RUBBER PLUNGER BOLT TIP RING BOLT BACK CUSHION BACK CAP HOW IT WORKS At rest, when the bolt is in the rear position, there is a positive forward force on the bolt from the air pressure in the shot chamber.
-
Page 9: Slg™ Bolt O-Ring List
SLG™ BOLT SLG™ BOLT OPERATION AND MAINTENANCE O-RING TABLE RE-COCKING / BLEED The SLG™ is equipped with a Pneumatic re-cocking system in case the bolt becomes jammed (pinching a ball). The button in the center of the bolt back can be pressed to send the bolt rearward and reset it for the next shot. - Page 10 LOADERS AND FEED NECK AIR/NITROGEN OPTIONS AND INSTALLATION LOADERS AND FEED NECK AIR / NITROGEN TANK OPTIONS AND To achieve the maximum INSTALLATION performance of the SLG™ The SLG™ will only work with you will need to use a motorized loader that force Compressed air or Nitrogen air feeds paintballs into the systems such as the DYE...
- Page 11 AIRPORT AIRPORT ASSEMBLY AND MAINTENANCE ASSEMBLY AND MAINTENANCE AIRPORT ADJUSTMENT AND AIRPORT PIN DEPRESSOR MAINTENANCE The airport on the SLG™ comes with an adjustable pin depressor. It’s preset to work with most of The location of the airport the systems on the market, but if needed it can be adjusted. adapter can be moved To adjust the pin depressor remove the hose from the front of the airport by pushing the gray approximately 1...
-
Page 12: Velocity Adjustment
HYPER3™ IN-LINE REGULATOR HYPER3™ IN-LINE REGULATOR ADJUSTMENTS AND MAINTENANCE ADJUSTMENTS AND MAINTENANCE VELOCITY ADJUSTMENT HYPER3™ REGULATOR DIS-ASSEMBLY INSTRUCTIONS The velocity of the SLG™ is adjusted by adjusting the input To disassemble the Hyper3™ regulator you will need a ⁄ ” allen key and a ⁄... -
Page 13: Anti Chop Eyes And Ball Detents
ANTI CHOP EYES/ BALL DETENTS ANTI CHOP EYES/ BALL DETENTS MAINTENANCE AND CHANGING MAINTENANCE AND CHANGING ANTI CHOP EYES CLEANING THE ANTI CHOP EYES The Anti Chop Eye (ACE) Quite often, just cleaning the breech out with a swab will clean the eyes well enough for them to system will prevent the SLG™... -
Page 14: Trouble Shooting
TROUBLE SHOOTING GUIDE TROUBLE SHOOTING GUIDE AIR LEAKS • If the leak is coming from the swivel piece AIR LEAKING FROM FRONT OF THE SLG™ EYES WILL NOT WORK, LED KEEPS where the hose connector mounts, you will • Remove the Bolt kit from the marker and BLINKING GREEN need to change the two #013 O-rings under change the front #016 O-ring on the bolt and... - Page 15 TROUBLE SHOOTING GUIDE TROUBLE SHOOTING GUIDE • Check that the solenoid cable is attached to FIRST SHOT IS TOO HIGH BREAKING PAINT NOTES: the blue female connector on the board. • Change the Seat inside the Hyper3™ regulator. • Make sure you use high quality paintballs and For disassembly instructions consult the that they are stored according to the TRIGGER BOUNCE / SLG™...
-
Page 16: Exploded View
EXPLODED VIEW SLG™ UL WARRANTY INFORMATION WARRANTY AND LEGAL INFORMATION WARRANTY PARTS LIST DYE Precision, Inc. warrants for one year to the initial retail purchaser, from the initial date of purchase, that the paintball marker and regulator are free from defects in materials and workmanship, subject to the requirements, disclaimers and limitations of this warranty.
Need help?
Do you have a question about the SLG ULTRALITE and is the answer not in the manual?
Questions and answers