Scheppach Basa 5.0 Translation From The Original Instruction Manual page 24

exhaust, as required by German regulations
governing hazardous materials. This results in
savings in electricity consumption and reduces
noise levels, as the vacuum exhaust unit is on
only during machine tool operation.
• A suction device which conforms with com-
mercial regulations must be used for suction in
commercial areas.
• Do not switch off or remove suction units or
dust extractors while the work machine is in
operation.
• The machine must only be used in technically
perfect condition in accordance with its desi-
gnated use and the instructions set out in the
operating manual, and only by safety-conscious
persons who are fully aware of the risks invol-
ved in operating the machine. Any functional
disorders, especially those affecting the safety
of the machine, should therefore be rectified
immediately.
• The safety, work and maintenance instructions
of the manufacturer as well as the technical data
given in the calibrations and dimensions must
be adhered to.
• Relevant accident prevention regulations and
other, generally recognized safety-technical
rules must also be adhered to.
• The machine may only be used, maintained,
and operated by persons familiar with it and
GB
instructed in its operation and procedures.
Arbitrary alterations to the machine release
the manufacturer from all responsibility for any
resulting damages.
• The machine may only be used with original
acces sories and original tools made by the
manufacturer.
• Any other use exceeds authorization. The ma-
nufacturer is not responsible for any damages
resulting from unauthorized use; risk is the sole
responsibility of the operator.
GB