Assembly - Texas A/S Spinner CM01 User Manual

4. Assembly

1. Unpack all parts and check that all parts are present.
Remove the battery from the machine to safely work on
the product.
2. Fit the lower frame between the two lugs on the main
unit. Fit one side and then flex the other side of the
frame until it fits over the opposite lug.
3. Use the two sets of nuts and bolts to assemble the
middle frame to the lower frame. See picture. The nuts
should be positioned on the inside of the frame. The
bolts on the outer side.
4. Use two sets of bolts and nuts to assemble the upper
frame to the middle frame.
Make sure that the ON/OFF switch and the cable are on
the same side of the frame. Check that the cable is not
caught. Fit onto the side of the frame where the socket
on the main unit is placed..
5. Connect the plug on the cable to the socket on the
main unit.
www.texas.dk
15