Linnenberg WIDOR Owner's Manual page 4

Room temperatures over 30 degrees Celsius
!
and / or extreme humidity should be
avoided. Keep away from heat sources like
radiators, heating, ovens or similar
appliances dissipating heat. It is important to
maintain an adequate supply of airflow to
prevent overheating.
Place the unit on a solid, flat level surface such
as a shelf or directly on the floor. Virtually, there
are no limitations on where to position your
WIDOR. We suggest positioning the unit so that
the connecting cables remain short.
Before connecting the WIDOR to your mains
!
the first time, check if the indicated mains
voltage is in accordance with your home
supply. Never plug an 115V version in a
230V mains socket or serious damage will
occur.
First, establish the AC – power connection. The
IEC mains input is located on the rear panel.
Make sure that the AC mains switch is set to (0) =
OFF. Connect the power cord to the IEC mains
input and plug it into your wall outlet or high
quality power strip.
4