Monitoring - Fracarro 3DG-PS-BU Operating Instructions Manual

3-The 3DG-PS-BU module is not connected to the electrical network or is not working properly and is not
supplying power;
The 3DG-PS-BU module will be shown with a red triangle, which means an anomaly is occurring, the 3DG-CU
module will have a green tick as given in Figure 4.
Fig. 4

7. MONITORING

The control unit allows you to monitor the events and the failures that can occur (for example, power supply
failure, etc.).
An exportable file of the historic events can be created or emails can be sent to report failures or events.
To enable this function, enter programming of the control unit from "Home", then "Monitoring" and
"Configuration"; the window given in figure 5 will appear.
From the configuration menu and Monitoring Status, you can set which events should be monitored. Select the
PSU malfunctioning and right click it with the mouse; the menu given in Figure 6 will appear. From this menu,
you can do the following:
- Enable monitoring of the power supply operation;
- enable the saving of events in the Control Unit historic;
- enable email notification in the event of a failure;
- Select the number of events after which the failure is memorized and the email is sent
- Set the text to be memorized and sent in the event of a failure.
16