Positioning The Spacers; Positioning On The "Cook&Chill" Stacked Units - Electrolux AOFP061U Manual

Hide thumbs Also See for AOFP061U:

Table of Contents

Enlarged version

AOFP061U, AOFP101U and AOFP102U models: the

condensation drain tray holder guides are fitted externally on the

bottom of the appliance. Take the bowl from inside the chamber

and slide it on to the holder guides.

AOFP201RU model does not have condensation drain tray.

B.1.3.2 Positioning the spacers

AOFP061U, AOFP101U and AOFP102U models: fitting the

spacers. The spacers must be positioned on the back of the

cabinet (see figures here below):

and screwed on with eight M5 x 12 screws, screwing them into

the mounting holes. The spacers have the function of keeping

A = spacers

the appliance a certain distance from the wall to allow the

refrigerating unit elements to cool properly. Failure to install the

spaces will void warranty and any responsibility of the

manufacturer.

B.1.3.3 Positioning of the "Cook&Chill" stacked units

If the AOFP061U blast freezer will be used to make a new a

"Cook&Chill" unit, please follow the instructions below, making

reference to the steps illustrated:

- take the 6 GN 1/1 oven and remove its leveling feet (see picture

"A")

- take the 4 spacer panels and fit them to the mounting holes on

the bottom of the oven (see picture "B")

Table of Contents

Aofp101u Aofp201ru