Inhalt Gültigkeit der Anleitung Gewährleistung Vor Gebrauch Symbole in der Anleitung • GEFAHR! • WARNUNG! • VORSICHT! • HINWEIS! Sicherheitshinweise Anwendungsbereich Transport und Handling Vor Inbetriebnahme Inbetriebnahme Bedienelemente Betrieb • Installation (als Stativ / Mastleuchte) • Installation (Hängebetrieb) Bedienung Störung Reinigung und Pflege Wartung und Instandsetzung Entsorgung &...
Gewährleistung Vor Gebrauch Hinsichtlich Gewährleistung und Garantieregelun- WICHTIG gen gelten die zum Zeitpunkt des Kaufs gültigen VOR GEBRAUCH SORGFÄLTIG LESEN AGBs. AUFBEWAHREN FÜR SPÄTERES NACHSCHLAGEN • Das Nichtbeachten dieser Gebrauchsanlei- Bitte beachten Sie auch unsere aktuellen Seiten im tung kann zu Verletzungen oder Beschädi- Internet www.setolite.com gungen führen.
Sicherheitshinweise Transport und Handling Nutzen Sie für den Auf- und Abbau (Installation) der Dieses Qualitätsprodukt ist nach aktuellen, tech- Leuchte die 4 Tragegriffe am oberen Deckel. nischen Standards gefertigt, geprüft und in einem Somit ist ein sicheres Handling gewährleistet. sicherheitstechnisch einwandfreien Zustand ausge- liefert worden.
Bedienelemente Betrieb (T) Tragegriff Installation bei Betrieb mit Stativ / Mastsystemen (W) Bolzenaufnahme Strahler mit Bolzenaufnahme und dem Stativ / (U) Vorsteckscheibe Mast verbinden. Mittels Sterngriff den ALDEBARAN XLD arretieren. ® Anpassen der Leuchte an Beleuchtungssituation Sie können die ALDEBARAN XLD individuell an ihre ®...
HINWEIS! WARNUNG! Verletzungsgefahr! Die Leuchte darf nur in Verbindung mit einem Sta- Fixieren Sie unbedingt den Sterngriff durch Fest- tiv- / Mastsystem betrieben werden, welches mit drehen im Uhrzeigersinn. So vermeiden Sie Unfälle einem Normzapfen nach DIN 14640 ausgestattet und Verletzungen. ist.
Reinigung und Pflege Verwenden Sie zum Reinigen der Kunstoffteile / Metallteile keine Lösungsmittel, Alkohole oder sonstige Chemikalien. Verwenden Sie zum Entfernen von Schmutz, Staub, Öl und Fett usw. ein weiches, trockenes und fusselfreies Tuch. GEFAHR! Elektrischer Strom! Vor jeder Wartung und Reinigung ist grundsätzlich das Gerät durch Ziehen des Netzsteckers vom Versor- gungsnetz zu trennen.
Content Validity of instruction Warranty Before use Symbols in the instructions • DANGER! • WARNING! • ATTENTION! • INFORMATION! Safety information Field of application Commissioning Control elements Operation 12-13 • Installation (as stand / mast lamp) • Installation (suspended operation) Control unit Failure Cleaning and care...
Warranty Before use With regard to warranty and guarantee regulati- IMPORTANT ons, the terms and conditions valid at the time of READ CAREFULLY BEFORE USE purchase apply. KEEP FOR LATER REFERENCE • Neglecting these instructions may lead to Take a look at our latest sites at www.setolite.com/en injuries or damages.
Safety information Commissioning This quality light was built according to the rules The ALDEBARAN XLD is only to be connected to ® of technology. The light was built, tested and alternating current (AC) – with voltage according delivered in proper condition. To maintain this to type plate –...
Control elements Operation (T) Carrying handle (W) Bolt reception Installation for operation with stand / mast systems (U) Slip-on filter Connect the light with the bolt reception and the stand / mast. Lock the ALDEBARAN ® Adjusting the luminaire to the lighting situation with the star knob.
Installation suspended operation Control unit The ALDEBARAN XLD light can be controlled via ® ATTENTION! the two rocker switches and the rotary control (only The ALDEBARAN XLD requires room / ambient ® with dimmable versions) on the control unit. The con- air for trouble-free operation.
Cleaning and care For cleaning the plastic / metal parts, do not use solvents, alcohols or other chemicals. Use a soft, dry and lint- free cloth for the cleaning. DANGER! Electrical current! Before every maintenance and cleaning, the device must generally be disconnected from the supply grid by pulling out the grid plug.
Need help?
Do you have a question about the Aldebaran XLD and is the answer not in the manual?
Questions and answers