Care And Cleaning - Zanussi ZDM11301WA User Manual

Table of Contents

Advertisement

Available languages

Available languages

• Put hollow items (cups, glasses and pans)
with the opening down.
• Make sure that cutlery and dishes do not
bond together. Mix spoons with other cut-
lery.
• Make sure that glasses do not touch other
glasses.
• Put small items in the cutlery basket.
• Put light items in the primary basket. Make
sure that the items do not move.
• Make sure that the spray arm can move
freely before you start a programme.
Using salt, rinse aid and detergent
• Only use salt, rinse aid and detergent for
dishwasher. Other products can cause
damage to the appliance.

Care and cleaning

Warning! Before maintenance,
deactivate the appliance and disconnect
the mains plug from the mains socket.
Dirty filters and clogged spray arm de-
crease the washing results.
Make a check regularly and, if necessary,
clean them.
www.zanussi.com
• The rinse aid helps, during the last rinsing
phase, to dry the dishes without streaks and
stains.
• Combi detergent tablets contain detergent,
rinse aid and other added agents. Be sure
that these tablets are applicable to the wa-
ter hardness in your area. Refer to the in-
structions on the packaging of the products.
• Detergent tablets do not fully dissolve with
short programmes. To prevent detergent
residues on the tableware, we recommend
that you use the tablets with long pro-
grammes.
Do not use more than the correct quantity
of detergent. Refer to the instructions on
the detergent packaging. The instructions on
the packaging usually refer to large dishwash-
ers (12 settings).
Before starting a programme
Make sure that:
• The filters are clean and correctly installed.
• The spray arm is not clogged.
• The position of the items in the baskets is
correct.
• The programme is applicable for the type of
load and for the degree of soil.
• The correct quantity of detergent is used.
• There is dishwasher salt and rinse aid (un-
less you use combi detergent tablets).
• The cap of the salt container is tight.
Cleaning the filters
Important! An incorrect position of the filters
can cause bad washing results and damage to
the appliance.
9

Advertisement

Table of Contents
loading

Table of Contents