Hints And Tips - Zanussi ZDM11301WA User Manual

• The phase indicators of the set pro-
gramme start to flash.
4. Press the start button. The programme
starts.
• The start indicator comes on.
• Only the indicator of the phase in opera-
tion stays on.
Starting a programme with delay start
1. Set the programme.
2. Press the delay button to delay the start of
the programme of 3 hours. The delay indi-
cator comes on.
3. Press the start button. The countdown
starts.
• The start indicator comes on.
• The phase indicators of the set pro-
gramme go off.
• When the countdown is completed, the pro-
gramme starts.
– The indicator of the phase in operation
comes on.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance con-
tinues from the point of interruption.
Cancelling the delay start while the
countdown operates
1. Press and hold the start button until the
start indicator and the delay indicator go
off.

Hints and tips

The water softener
Hard water contains a high quantity of miner-
als that can cause damage to the appliance
and bad washing results. The water softener
neutralises these minerals.
The dishwasher salt keeps the water softener
clean and in good conditions. It is important to
set the right level of the water softener. This
makes sure that the water softener uses the
correct quantity of dishwasher salt and water.
8
• The phase indicators of the set pro-
gramme start to flash.
2. Press the start button. The programme
starts.
• The start indicator comes on.
• Only the indicator of the phase in opera-
tion stays on.
Cancelling the programme
Press and hold the start button until the start
indicator goes off and the phase indicators for
the programme start to flash.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
At the end of the programme
When the programme is completed, the end
indicator comes on. If you do not deactivate
the appliance within 3 minutes, only the on/off
indicator stays on. This helps to decrease en-
ergy consumption.
1. Deactivate the appliance. Turn the pro-
gramme knob until the programme marker
is aligned with the on/off indicator.
2. Close the water tap.
Important! Let the dishes become cold
before you remove them from the appliance.
Hot dishes can be easily damaged.
Loading the baskets
• Only use the appliance to wash items that
are dishwasher-safe.
• Do not put in the appliance items made of
wood, horn, aluminium, pewter and copper.
• Do not put in the appliance items that can
absorb water (sponges, household cloths).
• Remove remaining food from the items.
• Make soft the remaining burned food on the
items.
www.zanussi.com