Using Your Kettle - Brabantia D1S-3T Instruction Manual

USING YOUR KETTLE

Before using this product, please read this manual carefully and adhere to all
instructions.
Before using the Kettle for the first time fill the Kettle with water to up to the maximum
indicator mark, boil and discard the boiling water. Repeat this instruction twice before
using the kettle.
1. Ensure that the Kettle is unplugged.
2. Open the lid and fill with cold water.
3. Never fill the Kettle when it is on the power base.
4. Fill the Kettle with the desired amount of fresh water. Ensure that the kettle, power
base and cord are dry and put the kettle on the base.
5. Ensure that the water level is filled above the minimum water level mark and that it
does not exceed the maximum water level mark.
6. When the Kettle has been filled with water, place it firmly on its base.
7. Ensure that the lid is properly closed by pressing it down firmly to close.
8. Turn on the switch. Do not turn on the kettle switch before placing the kettle on the
base.
9. When the water has boiled, the Kettle will switch OFF automatically.
10. The Kettle may be switched OFF at any time by turning the ON/OFF switch to the off
position.
11. Do not pour the water out of the Kettle before the water inside the kettle stops
boiling.
12. Take care not to be scalded by boiling water.
13. If the kettle shuts down automatically before boiling, this indicates that there is too
much scale in the Kettle and that it should be descaled.
COLOUR CHANGING LED LIGHTS
The LED on the thermal plate lights up blue when switched on, changes to purple as the
water heats up and turns red when the water starts boiling.