Maintenance - AEG BHSS18 Original Instructions Manual

When transporting batteries:
• Ensure that battery contact terminals are protected and
insulated to prevent short circuit.
• Ensure that battery pack is secured against movement
within packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice

MAINTENANCE

Use only AEG accessories and AEG spare parts. Should
components need to be replaced which have not been
described, please contact one of our AEG service agents
(see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the machine type printed as well as the six-digit
No. on the label and order the drawing at your local service
agents or directly at: Techtronic Industries GmbH,
Max-Eyth-Straße 10, 71364 Winnenden, Germany.
470 314 - BHSS18.indd 17 470 314 - BHSS18.indd 17
SYMBOLS
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any
work on the machine.
Please read the instructions carefully before
starting the machine.
Do not dispose electric tools, batteries/
rechargeable batteries together with household
waste material.
Electric tools and batteries that have reached the
end of their life must be collected separately and
returned to an environmentally compatible
recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
Always mount or dismantle tubes clockwise!
Air Flow Volume
Dust Storage Capacity
Sealed Suction
V
Volts
Direct current
This tool is only suitable for indoor use. Never
expose tool to rain
European Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
ENGLISH 17
29.01.2020 10:03:10 29.01.2020 10:03:10