Layout; Technical Data - EINHELL BT-XC 3,6 Li Operating Instructions Manual

Anleitung_BT_XC_3_6_Li_SPK1:_
GB
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
1. Safety information
Please refer to the booklet included in delivery for the
safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig. 1)
1. ON/OFF switch
2. Locking button for ON/OFF switch
3. Cutting attachment
4. Locking knob for changing the cutting attachment
5. Charging connection
6. Charging control lamp
7. Battery charger
8. Charging cable
3. Proper use
The equipment is designed for cutting carton, paper,
carpets and similar materials.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
10
04.06.2008 7:20 Uhr Seite 10

4. Technical data

Motor power supply: 3.6 V DC
Idling speed: 10 000 rpm
Battery charger output voltage:
Battery charger output current: 300 mA
Battery charger supply voltage: 230V~50 Hz
Charging time: 3 - 5 hours
Battery type:
Weight:
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level 78 dB(A)
pA
K uncertainty
pA
L sound power level 89 dB(A)
WA
K uncertainty
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Idle speed
Vibration emission value a h ≤ 2.5 m/s
K uncertainty = 1.5 m/s 2
Cutting textiles
Vibration emission value a h = 2.8m/s²
K uncertainty = 1.5 m/s 2
Important.
The vibration value changes according to the area of
application of the electric tool and may exceed the
specified value in exceptional circumstances.
6 V
Li-Ion
0.25 kg
3 dB
3 dB