Advertisement
6) FREQUENTLY ASKED QUESTIONS
How do I hook up this thing?
- See Section 2, beginning on page 3.
Can I substitute different tube types for the 12AX7/ECC83s or EF86?
- Although you can try 12AT7s, 12AU7s, 5751s without any harm, the design is optimized for 12AX7s, and are
therefore the only recommended tube in the preamp positions.
- No substitutions are permitted for the EF86 tube.
What settings do you recommend?
- EF86: Volume 10:00, Tone position 3 or 4
- Power amp: Cut 10:00, Master to taste (but louder is always better J)
Do I need to use matched power tubes?
- Although not necessary, matched power tube sets are recommended for best results.
Do I need to use a matched and balanced phase inverter?
- It is not necessary. Feel free to experiment with different tubes (of the same type) in your Crème Brulee,
though!
9
Advertisement
