Twin Tower Assembly - VTech Toot-Toot Drivers Twist & Race Tower Parents' Manual

9. Connect the Adaptor Track to Base Segment B.
Once you've completed the above steps, you are ready to play
with the Twist & Race Tower! You can connect the play set to
other Toot-Toot Drivers
alternate configurations, see instructions below.

TWIN TOWER ASSEMBLY

1. Insert Support Column B into the open slot on Base Segment.
2. Each section of Spiral Track has 2 numbered brackets. Starting
with track A at the bottom, match each Bracket with the tab of the
same number and snap into place. Use the Track Connectors to
join the Spiral Track segments.
play sets (each sold separately). For
®
15
15
15
15