does not fit, contact a qualified electrician. Do not modify the plug in any way.
- Before plugging power cord into electrical outlet, be sure that all electrical
information on rating label agrees with your power supply.
- To reduce the likelihood of circuit overload, DO NOT operate another high
wattage appliance on the same circuit.
- If an extension cord is necessary, use a properly rated cord (15 ampere, 14
gauge). Use care to position extension cord where it is least likely to be damaged
or tripped over during use.
- Do not allow power cord to touch hot surfaces during use. Loosely bundle cord
when storing.
- Always allow unit to cool (30 minutes for complete cooling) and empty Water
Tank before storing. Do not store unit with a damp microfiber pad still attached.
NOTE: This product may continue to produce steam for a few seconds after the
unit has been turned off.
- Use caution when using unit on uneven surfaces, such as stairs.
- When steaming any surface for the first time, it is recommended that you
consult the manufacturer's guidelines for material being steamed. For items in
question, test on an inconspicuous area before proceeding.
- Steaming unsealed hardwood or unglazed ceramic surfaces is not
recommended and may result in warping or damage to the surface. Steam
may remove the sheen from surfaces treated with wax.
- When steam mopping, never leave unit resting in one spot on any surface for
any period of time – prolonged exposure to heat and moisture may damage
floor surfaces.
- When filling, only water should be used in unit – other cleaning agents could
damage unit or cause injury. Distilled or de-mineralized water is highly
recommended, in order to minimize potential build-up of mineral deposits.
Do not fill with more than 8.45 oz (250 ml) of water. Do not attempt to use unit
without properly filling the unit.
- Burns can occur from touching hot metal parts, hot water, or steam. Do not
touch Main Nozzle or Steam Mop or attempt to connect accessories while unit
is in use. Do not touch removable accessories or attempt to change accessories
while unit is in use. Use caution when you turn unit upside-down – there may be
hot water.
- Only plug power cord directly into 120V outlet.
WARNING: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
FCC CONSUMER ADVISEMENT: This equipment may generate, use and/or
radiate radio frequency energy that may cause harmful interference to radio
communications. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to contact (833.800.8669) or (help@sihomecomfort.
com) for further instructions about replacement and repair.
Please refer to our website for the most current version of our owner's guide.
SAVE THESE INSTRUCTIONS
English
5
Need help?
Do you have a question about the SI-160 and is the answer not in the manual?