Disc, Usb & Sd Card Operation - auna 10027077 Manual

AF [ALTERNATIVE FREQUENCIES] BUTTON
When pressing the AF button briefly,the AF switching mode is selected and the AF switching mode is
displayed by AF segment in display.
• Segment off: AF switching mode off.
• Segment on: AF switching mode on, and has RDS information.
• Segment flashing: AF switching mode on, but RDS information is not received yet.
When the AF switching mode is selected, the radio checks the signal strength of the AF all the time.
The interval of checking time of each AFs depends on the signal strength of the current station, from
a few minute for the strong station to a few seconds for the weak station. Every time that a new AF is
stronger than the current station, it switches over to that frequency for very short time, and the NEW
FREQUENCY is displayed for 1-2 seconds. Because the mute time of the AF switching or the checking
time is very short, it is almost inaudible in case of normal program. (When AF flash on LCD, it will search
for the stronger RDS station. If AF and TP flash on LCD, it can only search for the traffic announcement
station). In FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can only receive and save
the RDS program.
TA [TRAFFIC ANNOUNCEMENT] BUTTON
Press the TA button shortly to turn on TA search mode. When traffic announcement is transmitted:
1 If the unit is in Disc Play mode, it will switch to radio mode temporarily.
2 Temporarily switch over to an EON linked station when EON detects a traffic announcement on that
other program, and TA, TP will be displayed on LCD
• TA interruption function: The current traffic announcement is cancelled by pressing TA button shortly.
• When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved only when traffic
program identification code has been received.
LOAD/ UNLOAD DISC , USB OR SD CARD
To play files in a disc,directly insert the disc into the disc slot. To unload a disc ,press the STOP button
twice to stop playback, then press the EJECT button to eject disc from the disc slot.
To play files in a card,press the REL button to release the front panel and remove it, then insert the SD/
MMC card to the card slot.
To unload a CARD , press the STOP button twice to stop playback, then press the REL button to release
the front panel and remove it. Push the card firstly and pull it out of the card slot.
46
Disc, USB & SD Card Operation
www.auna.de