Software Update - RADEMACHER 3400 00 19 Translation Of The Commissioning Instruction Manual

i

9.3 Software update

The Bridge is continually updated through firmware updates. You
can tell whether an update is available by the flashing green LED
or by a red update icon in the HomePilot® Smart Home app or user
interface in the browser.
i
1.
Open the app or the user interface in the browser.
2.
Select the "Maintenance" menu option and check to see if an
update is available.
3.
Start the update (if available). The red and green LEDs flash
during the update. This process may take several minutes.
4.
The Bridge is ready to use again once the LED lights up green
continuously and the red LED is off.
i
The power supply must not be disconnected during
the software update.
The entire update process takes approx. 5 minutes
plus the time for the download of the update.
EN
45