Bridge Connections And Buttons - RADEMACHER 3400 00 19 Translation Of The Commissioning Instruction Manual

i

5. Bridge connections and buttons

1)
2)
3) Reset
*
34
3)
DC 5 V / 3 A Power supply connection
(LAN)
i
You can erase all of your settings and return the
original factory settings during a reset.
Switch off the device by disconnecting the power supply.
Press and hold the reset button and switch on the power
supply again.
Wait until the red LED lights up continuously after flash-
ing and the green LED is off. The reset is now executed
and you can release the button again.
2) 1)
Connection to the local network
Reset button *
EN