i
3. Safety instructions
Mains voltage spikes can cause the device
to be damaged.
◆ Never install the Bridge during a thunderstorm.
i
3.1 Intended use
Only use the Bridge for configuring and controlling RADEMACHER
devices.
Operating conditions
◆ Only operate the Bridge in dry rooms.
◆ A 230 V/50 Hz mains socket is required for the connection
on site.
◆ The mains socket must be easily accessible.
◆ You need internet access and a router with a DHCP server
and a free LAN port to be able to use the Bridge.
◆ The installation and operation of the radio systems is only
permitted for systems and devices where a malfunction in the
transmitter or receiver would not cause a danger to persons
or property or where this risk is already covered by other
safety equipment.
i
◆ The Bridge can be used as a wall-mounted or tabletop
device.
30
Radio systems that transmit on the same frequency
can cause interference.
EN