Unit Installation And Removal - Power Acoustik PD-1032B Owner's Manual

UNIT INSTALLATION AND REMOVAL

Note
Before starting installation of the unit, make sure the wiring is connected properly.
Use only the parts provided with the unit to ensure proper installation.
The use of unauthorized parts may cause malfunction.
Install the unit where it does not get in the driver's way and will not injure the passenger in case
there is a sudden stop, like an emergency stop.
 INSTALLATION （Figure 1）
 Insert the unit into dash-board hole and fix it
 If necessary, place the mount strap at the rear of the unit and fix it with provided washer as
figure 2.
 Place Trim Ring over the unit and installation is completed as figure 1.
 Make sure all faceplate tabs meet properly with the mounting plate. (As Figure. 4)
 Press the panel, make sure the gear locked to the mounting hole. (As Figure. 5)
Figure 4 Figure 5
5