Power Acoustik PD-1032B Owner's Manual page 20

2) Tap button the device automatically makes a call to the latest call in its call log.
Voice Transfer
During a call, you can change a call from Bluetooth mode to phone by tapping Transfer button.
To have a call in Bluetooth mode again, tap Transfer button.
NOTE: the phonebook only supports Western Characters. Any difference in character will be
shown such as "+, * or # "
2. (A2DP) Music Mode
Tap Music button to listen music in Bluetooth mode.
You can select the function with the key for previous, play
or pause,stop and next.
A2DP (Advanced Audio Distribution Profile) Music Player
A2DP is a function which can receive the audio frequency
signal from the mobile phone, amplified by the car audio
and played out by the car speakers.
Notice: your mobile phone need to support A2DP.
Tap the buttons on the screen as shown, or press corresponding buttons (PAUSE/PLAY, STOP,
PREVIOUS/NEXT) on remote control to play, pause, play previous, or next music file.
3. In calling/Out calling mode
Tap In calling button or Out calling to see received and
dialed calls.The unit can download automatically all the
date from the mobile Phone.Dialed/Received/Missed calls
are saved In History mode .Tap Up/Down arrow load
previous/next history record.The calls in each category are
saved from the latest one to the final one.Select a number
and tap Send button to enter calling mode.
4. BT PHONE BOOK
The unit can download the data from phone, when the
pairing between a phone and the unit automatically
completed. The unit displays the data which have been
downloading from a phone. Select a number and tap Send
button to make a calling.
20