Ir Remote Operation - Monster MLB7-1030 Operation Manual

IR Remote
Operation
1 Turn on the LED Light Bar by pushing the ON button
on the remote control
Select the desired color of the desired effect by pushing
2
the corresponding button on the remote control
3 Set the desired brightness using the buttons to
increase/decrease the intensity of color
Push the OFF button to turn off the LED Light
4
Changing the remote control battery:
Note: The battery for the remote control has already been
installed. Remove the battery pull tab to operate.
1 The battery compartment is located on the narrow side
of the remote control
Remove the empty battery and insert a 3V battery,
2
type CR2025, with the positive terminal pointing upwards
3 Place the battery compartment back in the remote control
so it locks in place